by barnard | Mar 19, 2023
Our models S and SM were not designed to clone or as a ‘drop-in’ for the Rem 700. They were designed around the 308 Win cartridge family and, in the case of the SM, the HS precision magazine. (As used in the model 07 rifle.) They are the same diameter,...
by barnard | Mar 19, 2023
Please check the following as in our experience misfiring issues can more often than not be related to these issues: Primers not seated firmly against the anvil of the cartridge case. Incorrect head spacing on the barrel. Excessive grease inside the bolt slowing the...
by barnard | Mar 19, 2023
We have a guide available detailing the removal and replacement of the spring in your Barnard firing pin. Click here to view.
by barnard | Mar 19, 2023
Within Limits, Yes. You can for example uses a. 223 in a .308 boltface or a .308 in a .535” Magnum. Obviously you will replace the barrel .The extractor claw is replaced as well and you may find the ejector plunger is better removed as reliable ejection is not always...
by barnard | Mar 19, 2023
No. We get asked from time to time if our actions can be manufactured from stainless steel. We have in the past done “Stainless” 174PH Actions. These actions were not desirable to use, the material does not in our opinion meet our standards. “Our...