This action has been discontinued
A development of the Model P action, the Model PT is of conventional, cylindrical forward-locking turn bolt design, is available in single shot format as either left or right handed configuration. It has been developed to handle Magnum cartridges, such as the 300 Win Mags.
The bolt carries three forward locking lugs, is equipped with a Sako style extractor, a bolt face plunger type ejector can be included when an action is being ordered, and bolt face which can be supplied to accept any case rim up to 0.534″(standard Magnum rim). It undergoes finish machining after hardening, and is hand lapped to suit its mating receiver.
The receiver is a 4340 chrome/moly/nickel steel solid bottom cylinder, which is through hardened to 38Rc and finish machined after surface hardening to ensure concentricity
Supplied as standard with the Barnard Target trigger.
Model PT Details
| Receiver Length | 215mm (8.464″) |
| Receiver Diameter | 37mm (1.456″) |
| Bolt Diameter | 22mm (0.866″) |
| Striker Tip Diameter | 1.6mm (0.062″) |
| Lock Time | 1.7 milliseconds (calculated) |
| Loading Port Length | 100mm (3.937″) |
| Barrel Thread | 1 1/8″ UNF X 16TPI |
| Bolt Face | up to .534″ (std Magnum) |
| Action Mounting | 1/4 UNF cap screw |
| Rail Mounting | Drilled & tapped (M4) for our full length scope rails |
| Finish | Blue/Black standard |
General
- Technical Drawings
- Barnard Model P/PC Action Development Changes
- Barnard Firing Pin Instruction Sheet
- Barnard Suggested Cleaning and Maintenance Guide
If you have any questions regarding or products please check out the FAQ section or contact us directly. We are always happy to help.
